Sennheiser 502011 - Manual (Page 11)

8
Putting the Set 840 S system into operation
Connecting the transmitter to a headphone socket
̈ Adjust the volume of the headphone socket on your
sound source to a medium level.
This improves the quality of wireless sound transmis-
sion. For detailed information, please refer to the
instruction manual of your sound source (e.g. TV).
Connecting the transmitter to an RCA socket
̈ Plug the other end of the
connection cable
J into the
headphone socket on your
sound source.
Is the plug on the connection
cable too small for the head-
phone socket?
̈ Plug the adapter to ¼”
(6.3 mm) jack socket
K onto
the connection cable J .
With most TVs, the headphone socket is located at
the front or sides.
̈ Plug the audio adapter for
RCA socket
L onto the
connection cable J .
̈ Connect the red connector of
the audio adapter
L to the
red RCA socket R of your
sound source.
̈ Connect the white connector
of the audio adapter
L to the
white or black RCA socket L of
your sound source.
With most TVs, the RCA socket is located at the rear.
If your TV has several RCA sockets, use the socket
RCA output .
A
J
K
B
J
L