Socket Mobile BluetoothTM Connection Kit - Manual (Page 7)

CHAPTER 2: BASIC SETUP | 7
Chapter 2 Basic Setup
This chapter covers the minimum steps you must complete to install and use
the Bluetooth Card.
STEP 1: Register the Card
Register the card online at: www.socketcom.com/product/prodreg.htm
STEP 2: Prepare Network Information
Consult with your network administrator/MIS technician to obtain any
necessary settings for your network (e.g. IP addresses, dial-up number, user
name, password, etc.).
STEP 3: Install the Software
Follow these steps to install the software BEFORE inserting the Bluetooth
Card.
1. Make an active connection between the mobile computer and a host PC.
An active connection exists if data can move between the host PC and
mobile computer via a serial/USB/Ethernet connection cable or cradle.
2. Insert the Bluetooth Connection Kit Installation CD into the host PC.
3. The setup program should auto-run. Follow the instructions on your host
computer and mobile computer screens to install the software.
Note: If the program fails to auto-run, use My Computer or Windows
Explorer to access your CD-ROM drive. In the CD, click on
SETUP.EXE