Sony D-FJ401 - Manual (Page 7)

7
To Press
Play (from the point you stopped) N/>
Play (from the first track) N/> for 2 seconds or more
Pause/resume play after pause (for the CD player only) X
Stop x/CHG* 2
Find the beginning of the current track (AMS* 1 ) . once quickly* 2
Find the beginning of the previous tracks (AMS) . repeatedly* 2, * 3
Find the beginning of the next track (AMS) N/> once quickly* 2, * 3
Find the beginning of the succeeding tracks (AMS) N/> repeatedly* 2, * 3
Go backwards quickly Hold down .* 2
Go forward quickly Hold down N/>* 2
* 1 Automatic Music Sensor
* 2 These operations can be done during both play and pause.
* 3 After you have played the last track, you can return to the beginning of the first track by pressing N/>.
Similarly, if you are at the first track, you can locate the last track by pressing ..
About the display
• When you press N/> after changing the CD or turning off and on the player, the total
number of tracks in the CD and total playing time appear for about two seconds.
• During play, the track number and the elapsed playing time of the current track appear.
• During pause, the elapsed playing time flashes.
Setting the maximum volume level
(D-FJ405 only)
1 Set VOL (volume) on the remote control to maximum.
2 Adjust the volume on the CD player to the level that you want it to be. This level becomes the
maximum volume for the remote control.
If the volume level does not increase
If “AVLS” appears in the display of the CD player, hold down SOUND until “AVLS” disappears
from the display. For details, see “Protecting your hearing (AVLS).”
Playing a CD
(Continued)