Skil 2860 - Manual (Page 18)

-18-
Trouble Shooting
Read instruction manual first! Remove battery pack from the tool before making
adjustments or assembling accessories.
TROUBLE: TOOL WILL NOT START
PROBLEM 1. Battery pack not charged.
2. Battery pack not installed properly.
3. Battery pack temperature is too hot or cold for operation.
4. Burned out switch.
REMEDY 1. If equipped, check battery charge condition lights for charge status.
Charge battery if needed.
2. Confirm battery is locked and secured to the tool.
3. Let battery sit a few minutes or until it reaches normal operating
temperature.
4. Have switch replaced by an Authorized Skil Service Center or Service Station.
TROUBLE: BATTERY PACK WILL NOT CHARGE
PROBLEM 1. Charger not plugged into outlet.
2. Battery pack not completely inserted into charger.
REMEDY 1. Confirm charger is plugged into outlet.
2. Confirm battery pack is inserted into charger completely.
! WARNING
SM 1619X04717 04-10:SM 1619X04717 04-10 4/22/10 9:57 AM Page 18