Standard Horizon QUANTUM Series GX3500S - Manual (Page 67)

Page 67 GX3500S
12.11 NAMING THE RADIO OR RAM+ STATIONS
This selection allows you to provide the name to the radio and optional RAM+
Mic’s when connected.
1. Press and hold down the [CALL(MENU)] key until
“ Radio Setup ” menu appears.
2. Press the [ENT] key, then select “ Unit Name ” in the
“ Radio Setup ” menu with the CHANNEL selector
knob.
3. Press the [ENT] key.
4. Turn the CHANNEL selector knob to select the Unit
(Radio, RAM 1, or RAM2) to be named, then press
the [ENT] key.
5. Press the one of the Keypad keys to enter the first
letter of the unit name.
Example: Press the [2(MEM)] key repeatedly to toggle
among the seven available charactors associated
with that key:
2 A B C a b c .
6. Press the [ENT] key to enter the desired letter and
move the cursor one space to the right.
7. Repeat procedure until the name is complete. The
name can consist of up to twelve characters. If you
do not use all twelve character, press the [ENT] key
to move to the next space.
8. Press and hold the [ENT] key to enter the name and
exit from the “ Unit Name ” menu. The LCD will return to the “ Radio Setup ”
menu.
9. If you want to enter the name of another unit, repeat steps 3 through 8.
10. To exit this menu and return to radio operation mode press the [16/9] key.