Samsung DA99-01225E - Manual (Page 20)

20
INSTALLATION OF THE REFRIGERATOR
Check the dimensions of your entrance door to determine whether the refrigerator can pass
through it.
• Select a location with easy access to the water supply.
• Select a location with enough space for the refrigerator.
• Select a location without direct exposure to sunlight.
• Select a location with a level floor or close to it.
• Before disassembling the freezer door, the water supply line needs to be disconnected.
(If not, the water supply line may be damaged.)
• See “Removing the Freezer Door” on the 25 page.
Dimension
(mm)
Width
Model RM25*****
without hinge
Case Height
with hinge
with handle
Depth
without door
908 mm
1744 mm
1778 mm
895 mm
770 mm
Checking the Dimensions of your Entrance Door
Selecting the Location for the Refrigerator
• Allow clearance to the right, left, back and top when installing the refrigerator.
This has the advantage of reducing power consumption.
• Do not install the refrigerator where the temperature will go below 10°C.
Allow sufficient space for air circulation of the internal cooling system.
• When the refrigerator does not have enough space, the internal cooling system may not work correctly.
NOTE
10 cm
1 cm
5 cm
NOTE