Samsung DVD-HD941 - Manual (Page 8)

ENG-15 ENG-14
Choosing a Connection Choosing a Connection
Connection to a TV (For Progressive scan, Digital Video)
Method 1
DVD Player + TV with Component Video Jacks.
(The Video Output in Setup Menu must be set to Component (P-SCAN).)
Method 2
DVD Player + TV with DVI Jack.
• Depending on your TV, your hookup for Method 2 may differ from the illustration.
(The Video Input on TV must be set to DVI.)
Method 3
DVD Player + TV with HDMI Jack.
• Depending on your TV, your hookup for Method 3 may differ from the illustration.
(The Video Input on TV must be set to HDMI.)
Important Note
• Consult your TV User’s Manual to find out if your TV supports Progressive Scan, DVI or HDMI.
• If you want to convert Video Output to Progressive Scan, select Component (P-SCAN) in SETUP menu
and then select “Yes” within 10 seconds. Finally change the TV's external input to Component (480p).
(See Page 37)
• Use the VIDEO SEL. button to easily change the video output in no disc mode. (See page 11)
• If HDMI or HDMI-DVI cable is plugged into TV, the player output is HDMI/DVI out automatically.
• When the Video output is HDMI/DVI, Component (P-SCAN) will not work.
• If you want to control HDMI output Bringhtness, you can adjust brightness and contrast in your TV function.
• Refer to your TV user's manual.
Audio Output Jacks Audio Output Jacks HDMI Output Jack
TV
DVD
Player
Method 1
Method 2 Method 3
Progressive scan Basic Audio Digital Video DVI Audio Input HDMI Input