Sharp XL-3000 - Manual (Page 14)

01/1/17 XL-3000(U2)2.fm
14
Pr
ep
ar
ati
o
n
f
o
r U
s
e
- Sys
te
m
Connections -
System Connections (continued)
„ Speaker connection
Connect the wire with the white line to the minus (-) terminal and the
black wire to the plus (+) terminal.
Caution:
z Connect the speaker wires to the speakers first, then to the
unit.
z Use speakers with an impedance of 6 ohms or more, as lower
impedance speakers can damage the unit.
z Do not mistake the right and the left channels. The right speaker
is the one on the right side when you face the unit.
z Do not let the bare speaker wires touch each other.
„ Subwoofer connection
When a commercially available speaker with a built-in amplifier is
connected to this unit, you can enjoy sound with emphasized bass.
Connect an RCA cord from a commercially available speaker with a
built-in amplifier to the SUBWOOFER OUT jack.
„ Connecting the AC power cord
After checking all the connections have been made correctly, con-
nect the AC power cord to the AC power input jack, then plug the AC
power cord of this unit into the AC outlet.
Notes:
z Unplug the unit if it will not be used for a prolonged period of time.
z Never use a power cord other than the one supplied. Otherwise,
a malfunction or an accident may occur.
Right speaker Left speaker
Incorrect Incorrect
Black
White line
Speaker with a
built-in amplifier