Sony XTL-W70 - Manual (Page 17)

17
Adjusting the Screen Brightness
(Auto bright control)
Depending on the surrounding light, you can adjust the screen
brightness by controlling the brightness of the fluorescent pipe
installed in the liquid crystal panel.
Change the DIMMER selector located on the side of the monitor to
HIGH or AUTO.
Side of the monitor
HIGH: Increases the screen brightness.
AUTO: The unit responds to the surrounding light and adjusts the
screen brightness automatically (auto bright control).
Notes
• Do not cover the brightness sensor. If you cover the sensor,
the auto bright control will not work.
• The HIGH setting may make the screen look dazzling to your
eyes in the nighttime. Driving immediately after viewing the
screen could be dangerous; wait for your eyes to get
accustomed to the surround light before driving.
HIGH AUTO DIMMER
Brightness sensor