Shark SC637 - Manual (Page 9)

6 TOLL FREE: 1-800-798-7398
GARMENT BRUSH
Use the garment brush to open the
weave of the fabric for better steam
penetration.
1 Remove the steam nozzle bonnet
from the steam nozzle.
2 Attach the garment brush
attachment onto the steam nozzle
by lining up the bottom of the steam
nozzle with the back of the garment
brush attachment.
Then gently push the top of the
garment brush up into place until the
garment brush attachment snaps in
place.
3 Gently brush the area that is to be
steamed going with the grain or the
nap of the fabric.
4 When fi nished using the garment
brush attachment, unplug the
garment steamer and let it cool
completely before removing the
garment brush attachment.
IMPORTANT: Make sure that the
garment steamer is unplugged and
completely cool before attaching or
removing any accessories.
Using Your Accessories
1
2
3
3 www.sharkcompany.com
English
IMPORTANT: Hose, nozzle and
accessories can become hot during
use. Never hold, pull or relocate
the appliance by the hose. Hold the
steamer head by the hand grip and
never by the hose.
Use the steam bonnet on
the nozzle to prevent water
drops from being left on
the garment and to improve
performance.
ASSEMBLY
1 Remove the appliance and the
accessories from the packaging.
Insert the steam hose into the steam
hose connector.
2 Attach the steam nozzle bonnet over
the steam nozzle.
IMPORTANT: Do not plug in or turn
the appliance “On” until assembly is
completed.
1
2