Sony KL-50W1 - Manual (Page 18)

18
GB
A B B A
PROGR
PROGR
1
1
VTR 1-2-3 MDP
1 2
4 5
3
6
9 8 7
0 C
SAT
+ +
_ _
MENU
+
_
OK
+
_
RM-838
USE MEM
RESET
PAP (Picture and Picture)
Notes
• RGB input source
cannot be displayed in
PAP.
• PAP is not available in
the Zoom mode.
• The sound of the right
screen is only available
via the headphones.
• The picture quality of
the TV screen and
PAP may differ.
With this function you can display two screens at the same time. In
this way you can watch two TV programmes at the same time. Also
you can watch or monitor the video output from any connected
equipment (for example from a VCR) while watching TV or vice
versa. For information about connection of other equipment, refer
to page 23.
Switching PAP on and off
Press to display the screens in 8:9 format.
Press twice to display the screens in 4:3 format.
The PAP screen will be displayed next to the main TV screen.
The PAP screen will come from the source chosen when the TV
was last used.
To switch PAP off
Press
repeatedly.
Selecting PAP source
Press >.
The symbol > will be displayed at the bottom, left-hand corner of
the screen.
Press PROGR +/–, the number buttons or … to select the desired
source for the PAP screen.
Swapping screens
Press .
The main screen will switch the picture with the PAP screen.
8: 9 8: 9 4: 3
Freezing the picture
You have the possibility to “freeze” the picture of the PAP screen.
Press
once to freeze and twice to return to the normal screen.
PAP screen
Main
TV picture
A B B A
A A A B
A A
A A
A B
16: 9
8: 9
4: 3
Freeze
Freeze
Freeze
A
/
/
/