Sagem 912 - Manual (Page 27)

26
7. Call related features
CALLS/SEND No/ANONYMOUS
Your phone number is not shown to
the person you are calling. When
you switch your phone off, it is
automatically deactivated.
7.5 Auto redial
CALLS/AUTO RDIAL
You can activate auto redial
systematically or on demand if your
call did not complete. Any action on
the keyboard will cancel it.
7.6 Call waiting
(Service depending on the
operator)
CALLS/DBLE CALL
During a conversation, you may be
warned that someone is trying to
reach you. You will hear a special
tone.
When you switch
your phone off,
this menu is
automatically
deactivated.
The message CALL WAIT followed by the
call sequence number (and possibly the
caller’s phone number if stored) are
displayed on screen.
Depending on your network, you can then:
Cancel the waiting call by pressing C. The
caller then hears a busy tone.
Switch call by pressing Ok. The current
call is put on hold and you can answer the
new call.
Unite this call in conference by pressing
✱. All the parties can communicate
(MULTI-CONFERENCE) according to the
capacity of the network.
Terminate the current call by pressing .
Your phone rings normally to indicate the
waiting call.
7.7 Call hold
(Service depending on the operator)
During a conversation, you can put the
current call ON HOLD by pressing Ok.
The screen displays the message ON HOLD
followed by the hold sequence number (and
possibly the phone number if stored).
You can activate,
deactivate, consult
the status ot the
call waiting
service and check
whether it is active
or not.