Sony CDX-F7705X - Manual (Page 23)

23
Sound
• EQ7 Tune (page 24) — to adjust the equalizer
curve.
• HPF (High pass filter) — to select the cut-off
frequency to “78Hz,” “125Hz” or “off.”
• LPF (Low pass filter) — to select the cut-off
frequency to “78Hz,” “125Hz” or “off.”
• Loudness — to enjoy bass and treble even at
low volumes. The bass and treble will be
reinforced.
• AUX Level (page 26) — to adjust the volume
level of connected auxiliary equipment.
Receive Mode
• Local on/off (Local seek mode) (page 17)
– Select “on” to only tune into stations with
stronger signals.
• Mono on/off (Monaural mode) (page 17)
– Select “on” to hear FM stereo broadcast in
monaural.
– Select “off” to return to normal mode.
• IF Auto/Wide (page 17)
1
Press (MENU) .
2
Press M or m repeatedly until the
desired item appears.
3
Press < or , to select the desired
setting (Example: “on” or “off”).
4
Press (ENTER) .
After the mode setting is complete, the
display returns to normal play mode.
Note
The displayed item will differ depending on the source.
Tip
You can easily switch among categories by pressing
M
or m for 2 seconds.
Setting the equalizer (EQ7)
You can select an equalizer curve for 7 music
types (Xplod, VOCAL, CLUB, JAZZ,
NEWAGE, ROCK, CUSTOM), and OFF
(equalizer off).
You can store and adjust the equalizer settings
for frequency and level.
You can store the EQ7 setting for each source.
Selecting the equalizer curve
1
Press (SOURCE) to select a desired
source.
2
Press (EQ7) repeatedly to select a
desired equalizer curve.
Each time you press (EQ7), the item
changes.
To cancel the equalizing effect, select “OFF.”
After 3 seconds, the display returns to the
normal play mode.
continue to next page t