Sun Microsystems Sun Fire T1000 - Manual (Page 83)

Chapter 3 Removing and Replacing FRUs 71
▼ To Replace the Clock Battery on the
Motherboard
1. Unpackage the replacement battery.
2. Press the new battery into the motherboard ( FIGURE 3-13 ) with the + facing upward.
FIGURE 3-13 Replacing the Clock Battery on the Motherboard
3. Perform the procedures described in “Common Procedures for Finishing Up” on
page 72 .
4. Use the ALOM setdate command to set the day and time.
Use the setdate command before you power-on the host system. For details about this
command, refer to the Sun Fire T1000 Server Advanced Lights Out Management (ALOM) Guide.