Sangean RCR-8 - Manual (Page 20)

19
Listening to previously broadcast material
Some radio stations allow you listen to programs that have already
been broadcast. When you select a radio station that has this facility,
the station does not start playing immediately, but instead the display
shows the options ‘Live’ and ‘On demand’.
1. Press the Tuning+/- buttons and it will show ‘Live’ or ‘On Demand’.
2. Press the Select button to select:
‘Live’ - plays the current output from the station as normal.
‘On Demand’ - lets you listen to previous broadcasts.
The options will depend on the station you have chosen.
3. When you choose ‘On Demand’, the display shows the names of the
programs available.
4. Again, use the Tuning+/- and the Select button to select the program
that you wish to listen.
5. When you have chosen the program you want to listen to, either it will
start to play, or the display may show a list of days for you to
choose from, or it may show you a playback start time of 00:00.
Note that this is not the time that the original broadcast took place.
It is the time after the start of the program from which the radio will
start playing. If a start time is displayed, skip to step 7.
6. Use the Tuning+/- and the Select button to select the day the
program was broadcast. The display will then show a program start
time of 00:00:00.
7. To listen from the beginning of the program, press the Select
button again. Alternatively, choose the required start time to start
the program playing.
Fast-forward / Rewind broadcasts
Stations which enable you to listen to previously broadcast program
also allow you to fast-forward and rewind to any point within the program.
1. When the display shows 00:00:00 , Press the Fast-Forward or
the Rewind button on the top panel of the radio to program the
starting time. It is in 30 second increments.
2. When the required time into the program is reached, press the
Select button. and the program will resume from that point.
Play / Pause function
When listening to previously broadcast material, it is possible to
temporarily pause the program if needed.
To pause playback press the Play / Pause button on the remote control.
To resume playback press the Play / Pause button again.