User instructions – Smeg ST0904 User Manual

Page 12

Advertising
background image

User instructions

47


After using the table to identify the most appropriate washing program:

• press

the

ON/OFF button (1) and wait for the PROGRAM

INDICATOR LIGHT (2) to illuminate;

• keep pressing the PROGRAM SELECTION button (3) until the

indicator light corresponding to the desired program illuminates;

• close the door; after about 2" the program will start. While it is in

progress, the relative LIGHT will flash (indicating that the program is
being executed).


PROGRAMME

DURATION

CONSUMPTION (3)

NR

SYMBOL

NAME

TYPE OF

DISHES

AND DIRT

PROGRAM

DESCRIPTION

MINUTES

(2)

WATER

(LITRES)

(1)

POWER

(KWh)

(2)

DETERGENT

GRAMS

1

SOAK

Mixed dishes

awaiting washing

Cold rinse (to
prevent dirt from
drying)

15'

3,5

0,01

-

2

QUICK

Dishes and

glasses with

light dirt

Wash at 38°C
Cold rinse
Rinse at 58°C

45'

10

0,80

20

3

DAILY

Mixed dishes,

normal dirt

Wash at 65°C
Cold rinse
Rinse at 68°C
Dry

90'

10

1

30

4

NORMAL

65°C

Mixed dishes

and pans,

normal dirt

Cold prewash
Wash at 65°C
Cold rinse
Rinse at 68°C
Dry

105'

14

1,30

30

5

QUICK &

INTENSE

Mixed dishes,

normal dirt

which has

not dried

Wash at 65°C
Cold rinse
Rinse at 70°C

50'

10

1,20

30

Only run the soak program with half loads.

The WASH-ZONE (10) and 3/1 (8) options are available for all programs except soaking.

(–) Not present.

(1) Average power consumption with the softener set on level 2.

(2) The cycle duration and power consumption may vary according to the water and
room temperatures, and the type and amount of dishes.

(3) The stated water and power consumption values refer to nominal conditions. Real

values are affected by the type of load of dishes, room temperature and incoming water
temperature.

Advertising