Samsung SCC-B9270 - Manual (Page 8)

04_ troubleshooting
Monitor Impedance
- Set the impedance switch to 75 standard position.
- When monitor is set to high impedance mode, the picture may become blurred. In this case,
check the switch position of monitor impedance.
Fourth : Turn the camera direction to the picture that you want to display.
Caution
To avoid smear, do not expose the camera directly to a strong light source such as the sun or spot light.
troubleshooting
If you have trouble operating the camera, check the following guides for the
possible problem.
Nothing appears on the screen.
- Check the power connection and video signal line connection.
- Check the brightness level of DC Auto Iris volume of the camera.
The video image is not clear.
- Check if the camera glass has dust on the surface.
Clean the camera glass with a clean cloth or brush.
- Make sure that the screen is not exposed directly to a bright light.
Adjust the position of the camera if necessary.
- Check if protective film of camera glass is removed.
The screen is dark
- Adjust the brightness feature of the monitor.
- Check the brightness level of DC Auto Iris volume of the camera.
The screen does not properly display when IR LEDs work.
- Check if the camera glass has dust.
- Clean the camera glass with a clean cloth or brush.
If you cannot solve the problem with above guidelines, please contact an
authorized technician.
•
•
•
•
•
01-SCC_B9270_EU-ENG.indd 4 2008-03-12 오후 3:36:31