SEAL AQUA AS-1600 - Manual (Page 7)

Section 1. Introduction
6
The AquaSEAL™ AS-1600 is a medium to large format media liquid laminator used
to coat graphics with a protective sealant. Operating roll to roll, the media is
threaded under the applicator mechanism, under the drying assembly, and onto the
take-up roller. During operation, the liquid laminator applies sealant onto the printed
graphics and then cures and dries it before winding the media onto the take-up core.
Hardware Overview
Figure 1.1 shows the front view of the liquid laminator. Major components
(safety
items shown in red) include the following:
Figure 1.1 AquaSEAL™ AS-1600 Liquid Laminator Front Views
Unwind Mandrel
Dam Stop Assembly
Draw Down Assembly
Sealant Tank
Applicator Nozzle
Drip Tray
Dryer Panel