Sunpentown Intl WA-1410E - Manual (Page 12)

Setting ventilation speed
1. Press SPEED button to choose the desired ventilation speed: High, Medium or Low. The
indicator respective speed will light on at the same time.
2. If the unit is in AUTO mode, it will choose the ventilation speed automatically according to
the ambient temperature (the related indicators will light on), at this time, this button is
invalid.
Setting timer
1. Pressing the TIMER button while unit is operating will set desired operating hours (1 to 24
hours, the timer indicator will light on). When the set time has been reached, the machine
will turn off automatically. The display window will show the hour(s) you set as you press the
TIMER button. If the timer button is not pressed, unit will work continuously.
2. Pressing the TIMER button while unit is off will PRE-SET the time for the machine to start
working. For example, if you press the timer to '2', the unit will start operating automatically
after 2 hours.
Sleep function
1. By selecting the SLEEP button in cooling mode, the set temperature will increase 2
o
F
automatically after the 1
st
hour, and another 2
o
F after the 2
nd
hour, then keeps at that
temperature.
2. By selecting the SLEEP button in heating model, the set temperature will decrease 2
o
F
automatically after the 1
st
hour, and another 2
o
F after the 2
nd
hour, then keeps at that
temperature.
3. Re-press the SLEEP button, the setting temperature will return to your set temperature.
4. The unit will shut down automatically after running in SLEEP mode for 12 hours.
5. Auto mode will not work in this function.
UV-TiO2 / Ionizer function
(This is only for model with UV or Ionizer function)
1. To start the UV or Ionizer button, press UV/Ionizer button.
2. Unit will start to clean the air and improve air quality.
UV-TiO2: Oxidization and decompose viruses, organic materials, odor and bacteria.
Ionizer: Negative Ionizer creates negative ions, and neutralize with the positive ions in the air.
Memory IC function
This unit is incorporated with a Memory IC. If the power is cut and then resumes, unit will
automatically restart in your previous setting. Please allow 3~5 minutes for the compressor to
regain function.
11
All the above functions can also be performed with the supplied remote
control (see fig.18).
This remote control requires 2pcs AAA batteries to operate
FIG. 18
05-03-457 A029-OK.PDF