Sony ICD-SX800 - Manual (Page 43)

ICD-SX700/SX800 4-127-580-11(1)

GB
Re
co
rd
in
g
The recording starts when the IC recorder
detects sound. The recording pauses
when no sound is detected and “ ” and
“ ” flash. When the IC recorder detects
sound again, the recording starts again.
To cancel the VOR function
Set “VOR” to “OFF” in step 3.
Notes
The VOR function is affected by the sound
around you. Set “REC LEVEL” in the menu
according to the recording conditions. If
recording is not satisfactory after you have
changed the microphone sensitivity, or for
an important recording, set “VOR” to “OFF” in
the menu.
If you press
 (record/pause) to pause
recording during VOR recording, only “
” flashes.
During synchronized recording (page 51),
manual recording (page 35), and pre-
recording (page 38), the VOR function does
not work.




Dividing a Message
into Two During
Recording
DIVIDE/
You can divide a message during
recording so that the message is divided
into two parts, and a new message
number is added to the newer part of
the divided message.