Sun Microsystems 1500 - Manual (Page 10)

11-16 Sun Blade 1500 Service, Diagnostics, and Troubleshooting Manual • April 2003
FIGURE 11-15 Pressing Down on the Clip Latch
b. Slide the clip to unhook the end opposite the latch.
This relieves clip pressure.
c. Rotate the clip away from the CPU fan and heatsink assembly and lift it off the
locking ring.
Set the clip aside. If removing clips separately, repeat from Step a for the other
clip. See
FIGURE 11-16 .
FIGURE 11-16 Releasing the CPU Fan and Heatsink Assembly Clips
Latch
End tabs (4)
Center tab
Clips (2)
Locking ring
Clips (2)
Locking ring