Samsung RB215BSSW - Manual (Page 18)

18
REVERSING THE DOOR SWING
Read these instructions completely and carefully
25. Assembling Hinge on the top of the
refrigerator with the bolts. And then connect
the electric wire.
23. After disassembling Grommet and Cap wire at
the left side, assemble them into the right side.
26. Assemble the Cover Hinge with the
screws as below picture.
27. Finally, confirm openning and closing of
the fridge door.
24. Assemble the parts to the reverse side.
Electric wires must be sealed in covers.
After door reversing, it is necessary to check and
adjust the gasket whether it is entirely contact the
cabinet or not.
Grommet Grommet Cap wire Cap wire
Cover Hinge Cover Hinge