Samsung SGH-E700A - Manual (Page 60)

Phone Settings
114
Change PIN2 (Menu 4.4.8)
The Change PIN2 feature allows you to change your
current PIN2 to a new one. You must enter the
current PIN2 before you can specify a new one.
Once you have entered a new PIN2, you are asked
to confirm it by entering it again.
Note: Not all SIM cards have a PIN2. If your SIM card
does not, this menu option is not displayed.
Auto Redial
(Menu 4.5)
With the Auto Redial function, the phone makes up
to ten attempts to redial a phone number after an
unsuccessful call.
Note: The interval between two call attempts varies.
The following options are available:
Off: the number is not redialled.
On: the number is redialled automatically.
Side Key
(Menu 4.6)
This menu option allows you to change the function
of the volume keys on the left side of the phone
when you receive an incoming call.
The following options are available:
Reject: the incoming call is rejected when you hold
down one of the volume keys.
Silence: the ring tone is silenced when you hold
down one of the volume keys; the call is not
rejected.
Phone Settings
115
Fax Mode
(Menu 4.7)
You can use your phone as a modem for faxing
when it is connected to computing devices. You
need to purchase a data kit from your local
Samsung dealer.
In this menu, you can enable the fax mode on your
phone.
The following options are available:
Off: you can send or receive data calls.
On: you can send or receive fax calls.
In any case you can send or receive voice calls.
After connecting the phone to your computing
device using the data cable and set this menu to
On. Your phone works as a fax modem.
For further details about setting and faxing through
the phone on your computer, see the computers
user’s manual.
Infrared Activation
(Menu 4.8)
In this menu, you can activate or deactivate the
infrared port.
The following options are available:
Off: deactivates infrared feature on the phone.
On: activates the infrared feature on the phone.
The IrDA icon (
) appears on the top line of the
display.
If there is no communication between your phone
and the IrDA-compliant device within 1 minute of
activating the feature, it is automatically
deactivated.