Operation, Disc playback, Mp3- cd playback – Samsung HT-TP12 User Manual

Page 10: Mp3-cd playback

Advertising
background image

GB

18

17

OPERA

TION

2

Load a disc.

Depending on the content of the disc, the initial screen may appear different.

1

Press

OPEN/

CLOSE

button to

open the disc tray.

3

Press

OPEN/

CLOSE

button to

close the disc tray.

Place a disc gently into the
tray with the disc’s label
facing up.

Note

To stop playback, press

STOP

during playback.

If pressed once, “

PRESS PLAY

” is displayed and the stop position will be stored in memory.

If

PLAY/PAUSE

( ) button or

ENTER

button is pressed, playback resumes from the stop position.

(This function works only with DVDs.)

If pressed twice, “

STOP

” is displayed, and if

PLAY/PAUSE

( ) button is pressed, playback starts from the

beginning.

To temporarily pause playback, press

PLAY/PAUSE

during playback.

To resume playback, press

PLAY/PAUSE

( ) button again.

DVD

VCD

CD

Playback starts automatically.

MP3

Depending on the recording mode, some MP3-CDs may not play.

Table of contents of a MP3-CD varies depending on the MP3 track format
recorded on the disc.

MP3 file support: MPEG1 LAYER3 (BITRATE : 128KBPS~320KBPS ,
SAMPLEING FREQ.: 32K/44.1K/48KHz)

Note

2

In Stop mode, use

to select

the album, and then
press the

ENTER

button.

The MP3 menu screen will appear and
playback will start.

The appearance of the menu depends on
the MP3 disc.

1

Press the

OPEN/CLOSE

button

to open the disc tray,
and then load the
MP3 disc.

4

Press the

STOP

button to stop
playback.

To select another album and track,
repeat Steps 2 and 3 above.

3

To change the album,
use to
select another album
in Stop mode, and
then press the

ENTER

button.

Disc Playback

Data CDs (CD-ROM, CD-R, CD-RW) encoded in MP3 format can be played.

MP3-CD Playback

Selecting the Video Format

Press and hold

NT/PAL

button on the remote controller for over 5 seconds while the power is turned off.

By default, the video format is set to "PAL".

"

NTSC

" or "

PAL

" will appear in the display.

At this time, press the

NT/PAL

button shortly to select between "

NTSC

" and "

PAL

".

Each country has a different video format standard.

For normal playback, the video format of the disc must be the same as the video format of your TV.

Advertising
This manual is related to the following products: