Sony SLV-ED313 - Manual (Page 8)

8
SLV-ED313 GB 3-065-583-E1 (1)
Recording TV
programmes
1
Turn on your TV and set it to the video channel.
2
Insert a tape with its safety tab in place.
3
Press PROGRAM +/– to select the programme position you want to
record.
4
Press z REC to start recording.
The recording indicator lights up red in the display window.
To stop recording
Press x STOP.
To check the remaining tape length
Press DISPLAY on the remote commander. The white bar indicates the
approximate length of tape remaining.
To watch another TV programme while recording
1
If the TV is connected to the VCR using an audio/video cable, set the
TV to TV input. If the TV is connected to the VCR using only the aerial
cable, skip this step.
2
Select another programme position on the TV.
To save a recording
To prevent accidental erasure, break off the safety
tab as illustrated. To record on the tape again,
cover the tab hole with adhesive tape.
PROGRAM
REC
SP
APC
LP APC
z REC PROGRAM +/–
Recording indicator
Safety tab
01GB02CNT-ED313.p65 12/3/01, 11:13 AM 8