SIGMA DA5320 - Manual (Page 12)

14811 • January 2005 • Operation
Page 8
Display Activation
To access menus when the Idle Display is showing, press any button.
Status Check
To check the current status of any parameter, activate the menu display and navigate
through the menu to the edit screen for the parameter of interest. The initial display will be
static, indicating the current data being held in memory for that parameter. If no additional
keys are pressed at this time the display will revert to its previously configured idle state
(Idle display or channel delay).
Parameter Configuration
Activate the menu display and navigate through the menu to the edit screen for the param-
eter to be configured. Pressing the UP or DOWN arrows will change the display to a new
value and it will begin to blink. Pressing the SELECT button at this point will abort the
change and return the display to the idle screen.
To record the parameter change requires that the TAKE button be pushed when the dis-
play is blinking. If there are multiple fields (characters) to be changed for a particular
parameter, each time the TAKE button is pressed the display will advance to the next field.
The new value for the parameter will be stored in memory only after all necessary fields
have been defined.