Samsung DVD-P191K - Manual (Page 29)

●
REFERENCE
English _29
reference
Introduction
Samsung will often support the software upgrade to
improve the performance of this unit to the latest sta-
tus, through Samsung Internet Site (www.samsung.
com).
What improvements are made depends on the upgrade
software you are using as well as the software that
your DVD-player contained before the upgrade.
How to make an upgrade disc
Write the downloaded file onto a blank CD-R or CD-
RW disc, using the following settings:
Upgrade procedure
1. You have to download a new file through Download Center
of Samsung Internet Site (www.samsung.com).
2. Write the file to Disc using CD-RW of your computer.
Note
- File System CD-ROM ISO Level
- Character set ISO 9660
- Finalized, single session
- Write speed low
Firmware upgrade
1. Open the disc tray. Place the disc on the tray. Close the
tray. The Firmware upgrade screen appears.
Firmware upgrade
appears on the display
Firmware upgrade starts
- In the middle of the writing, the tray will open
automatically. After taking out the disc, please wait for
about 2 minutes.
- If the unit was succesfully updated, the unit will turn off
and on after closing the tray automatically. When the
unit turns on, this screen will display.
3. Press the π /† buttons then press ENTER button to select
the desired language
Note
- If the “Select Menu Language” doesn’t appear,
please contact to “Samsung Service Center”.
- Do not press any button and unplug the power
cord during upgrade.
- The upgrade procedure may change, refer to the
web site (www.samsung.com).
2. Press the √/® buttons to select Total, then press the
ENTER button.
English
Français
Deutsch
Español
Italiano
Nederlands
Old Version : 090109.00.B.P490K2XEG
New Version : 090123.R2.B.P490K2XEG
Old Version : 090109.00.B.P490K2XEG
New Version : 090123.R2.B.P490K2XEG