Snapper R8002BE - Manual (Page 37)

Main Chain Case
Footnotes:
TP 400-5202-5-RT-N
Manual No. 7006033 LARGE FRAME REAR TINE TILLERS
SERIES 2
37
Part No Description Item Qty Note
7051375 ASSEMBLY, Main Chain Case (Includes items 1 thru 24)
1 7051408 ASSEMBLY, Chain Case (Right Hand)
7051408 CASE, Right Hand Was 49714
7010756 BEARING, Ball
7011176 BEARING, Needle
7013681 2 SEAL One was 23775 double lip
2 7092062 NUT, 5/16-24 Hex Lock Was 11201
3 7090554 SCREW, 5/16-18 x 3/8" Self-Tapping
4 7032248 2 RETAINER, Depth Bar
5 7091575 9 NUT, 5/16-18 Hex Lock Was 90184
6 7014980 4 WASHER, Seal
7 7014677 2 STUD, Spacer 5/16 x 2.6
8 7019716 GASKET, Chain Case Housing
9 7050724 SPROCKET ASSM'Y., Intermediate (Includes following indented
items)
7040437 SPROCKET
7011178 2 BEARING, Roller (Press fitted-flush)
10 7011181 SPACER
11 7040364 SHAFT, Tine Rotor
12 7014313 CHAIN, Drive (#50)
13 7091318 9 SCREW, 5/16-18 x 3/4" Hex Head Cap Was 90206
14 7091601 4 NUT, 5/16-18 Hex Flange Lock Was 90585
15 7038090 2 PLATE, Wear Guard
16 7090838 SCREW, 5/16-24 x 2 1/4" Hex Head Cap, Grade 5
17 ASSEMBLY, Chain Case (Left Side)(Not Available) Was 51363
* CASE, Left Hand (Not Available) Was 49701
7010756 BEARING, Ball
7011176 BEARING, Needle
7013681 2 SEAL
18 7021752 RACE, Sprocket Bearing
19 7014312 CHAIN, Drive (#35)
20 7010690 WASHER, Shim .625 x .812 x .016
21 7090858 11 SCREW, 5/16-18 x 1/2" Self-Tapping
22 7019102 ASSEMBLY, Drive Shaft Was 51786 (Includes items 23 &
24)
23 7015017 RING, Tolerance .625
24 7019102 SHAFT, Drive
25 7010211 KEY, #9-3/16 x 3/4" Woodruff
* NOTE: This part may be available from DPNI 1-800-558-1848 (Todd Graff)