Swann Advanced Quad Processor - Manual (Page 2)

2 7
CONTENTS
Introduction
Your Color Quad package comes with
Simple Connection Instructions
Operation - Front Panel
Operation - Rear Panel
Menu Screens
Technical Specifications
Warranty Information
Help Desk / Support Details 2
2
3
4
5
6
7
Back Cover
Back Cover
2
2
3
4
5
6
7
Back Cover
Back Cover
The Swann Quad Processor is a low cost, convenient security solution for
monitoring up to four areas in your home or business at once. Simply connect
up to four security cameras to the Swann Quad Processor and view them on
any A/V TV, VCR or Swann security monitor and you can keep an eye on all the
important areas from one central location!
Choose between a quad screen (4 cameras at once), split screen, picture in
picture or see each camera view individually in full screen. The Swann Quad
Processor also features an auto-switch function allowing you to scan between all
camera views (including the split screen) with a user definable pause on each
screen.
INTRODUCTION
INSTALLATION
• 1 x Color Quad Processor
• 1 x 12Volt Power Adaptor (design may vary between countries)
• 5 x BNC Male to RCA Female adaptors
• 1 x IR Remote Control
• 1 x Video Cable
• This Instruction Sheet
If any of these items are missing, please contact your retailer.
Refresh Rate NTSC/60frames/sec, PAL/50 frames/sec
Resolution NTSC: 720 x 480, PAL: 720 x 576
Video System PAL or NTSC switchable
Video Input 1.0Vp-p/75 ohms
Video Output 1.0Vp-p/75 ohms
Power Source 12Volt
Operation Temperature 14°F ~ 122°F / -10°C ~ 50°C
Dimensions (H x W x D) 1.29 x 5.7 x 4.72 (inches) / 33 x 145 x 120 (mm)
Weight 0.88 pounds / 400 grams
Ports Camera In x 4 - BNC Female
VCR In x 1 - BNC Female
VCR Out x 1 - BNC Female
Monitor Out x 1 - BNC Female
FCC Notice
We, Swann Communications of 10612 Shoemaker Avenue, Bldg A, Santa Fe Springs, CA
90670 USA, declare under our sole responsibility that the product:
SW247-QP4
This product meets the requirements specified in Part 15 of FCC Regulation. Operation rests
with the following two conditions:
(1) The equipment should not cause any harmful interference;
(2) The equipment must receive and process any interference, including any possible
interference caused by operation mistakes. After testing the product, we confirm that it complies
with the provision for class C digital equipment in the 15th part in FCC regulation; and the
receiver complies with the limitations for class B digital equipment in Part 15 of FCC regulation.
The product generates, applies and emits radio waves. It might cause harmful interferences to
wireless communication if not be installed and used following the description of the manual. The
product may cause interference in residential area, and the customer should take remedies to
eliminate the interference at their own costs. If the product causes any harmful interference to
wireless equipment or disturbs the receiving of TV signals (it can be identified by turning on and
off the product), you can solve the trouble by following methods:
(1) Re-adjust the product or put it in another place;
(2) Extend the distance between the equipment interfered and the product; and
(3) Refer to dealers or experienced radio electrician for help.
CE Notice
This product complies with standards including Low Voltage Device Directive 73/23/EEC; EMC
Directive 89/336/EEC and R&TTE Directive 1999/5/EC. It passed the subject tests by the
authority concerned and is authorized to bear CE mark.
TECHNICAL SPECIFICATIONS Contents Technical Specifications
Introduction
Your Color Quad package comes with
FCC NOTICE
This device complies with Part 15 of FCC Rules.
Operation is subject to the following conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received,
Including interference that may cause undesired operation.