Sony DF70P - Manual (Page 17)

O
per
at
ing
t
he
Came
ra
Controlling the Monitor Image
17
The last selected mode is saved in the computer, and it
will stay selected for the next starting.
(Volume)
(Displayed when the Microphone (page 29) is set to
On.)
Drag the bar of
icon to adjust the volume.
When you click icon, the icon changes to and
the audio output stops. To output the audio, click
again.
Note
If the volume icon is not displayed due to the use of Java
applet viewer, Audio codec may not be set
G.711(64kbps) (page 29) or Java may not be installed
correctly.
To check if Java is installed correctly, refer to “Java
applet viewer” of “About Viewers” on page 15.
Monitor Image
The image shot by the camera is shown here. Date and
time is displayed at the top of the window.
Controlling the Monitor
Image
You can monitor the camera image on the monitor
window of the main viewer.
Monitoring the camera image
1
Log in to the home page to display the main viewer.
You can see how to log in on page 14, “Logging in
as a User”.
2
Select the frame rate (only when the camera Video
mode is set to JPEG).
Click the Frame rate list box to select the frame
rate for transmitting the image. The selectable
frame rates are the following:
SNC-DF70N:
1, 2, 3, 4, 5, 6, 8, 10, 15, 20, 25, 30
SNC-DF70P:
1, 2, 3, 4, 5, 6, 8, 10, 15, 20, 25
The numbers indicate “fps” (the number of frames
transmitted per second).
Note
The frame rate options indicate the maximum
number of frames that can be transmitted.
The number of frames actually transmitted may
vary depending on network environments and
camera settings (image size and image quality
settings).