Am antenna connection, Connections, Cooling fan – Samsung HT-DS100 User Manual

Page 19

Advertising
background image

The cooling fan dissipates the heat generated inside the unit so that the unit can be operated
normally. The cooling fan is activated automatically to supply cool air to the unit.

Please observe the following cautions for your safety.

Make sure the unit is well-ventilated. If the unit has poor ventilation, the temperature inside the unit could rise
and may damage it.

Do not obstruct the cooling fan or ventilation holes. (If the cooling fan or ventilation holes are covered with a
newspaper or cloth, heat may build up inside the unit and fire may result.)

Cooling Fan

18

SUBWOOFER

REAR

R

FRONT

R

CENTER

REAR

L

FRONT

L

IMPEDANCE
FRONT / CENTER / REAR : 6Ω

SUBWOOFER : 3Ω

CONNECTIONS

Connect the AM loop antenna supplied to the AM and terminals.

If reception is poor, connect an outdoor single vinyl-covered wire to the AM
terminal. (Keep the AM loop antenna connected).

AM antenna connection

1

2

3

1
2

Snap the tabs on the loop into the

slots of the base to assemble the

AM loop antenna.

AM Loop Antenna

(supplied)

If AM reception is poor, connect an outdoor

AM antenna(not supplied).

1p~34p(DS100)-SECA GB 11/10/04 8:52 AM Page 21

Advertising