Sony DPP-FP55 - Manual (Page 65)

65 GB
Troubleshooting
Symptom
Paper does not
feed.
The print paper
emerges
partially during
printing in
process.
Printing
Check
• Is the print paper properly
set in the paper tray?
• Are you using print paper
that was not designed for
the printer?
• Is the print paper
jammed?
• Is it in the middle of the
printing process?
Cause/Solutions
c If print paper is not properly loaded,
the printer may develop trouble.
Check the following:
• Is the correct set of print paper and
print cartridge loaded? ( .page
11)
• Is the print paper loaded in the
correct direction in the tray?
(
.page 14)
• Did you place more than 20 sheets of
print paper in the paper tray?
(
.page 14)
• Did you riffle the print paper
thoroughly?
• Did you bend or fold the print paper
before printing?
c Use print paper designed for the
printer. If you use incompatible print
paper, the printer may develop
trouble. (
.page 11)
c When the printer cannot feed the print
paper, an error message is displayed.
Remove the paper tray and check
paper jam. (
.page 80)
c The print paper may emerge a few
times during printing. Do not touch
nor pull the emerged paper. Wait for
the print paper to be fully ejected after
printing ends. As the print paper
emerges from the rear a few times
during printing, make sure to spare
enough space behind the printer
during printing.