Sony KV-28FX66B - Manual (Page 25)

25
GB
Troubleshooting
Here are some simple solutions to problems which may affect the picture and sound.
Additional Information
Problem
No picture (screen is dark)
and no sound.
Poor or no picture (screen is
dark), but good sound.
No picture or no menu
information from equipment
connected to the Scart
connector.
Good picture, no sound.
No colour on colour
programmes.
When you switch on the TV
does not appear the last
channel you were watching
before switching the TV off.
Distorted picture when
changing programmes or
selecting teletext.
Distorted picture when
pressing the Remote Control
Locator button.
Wrong characters appear
when viewing teletext.
Wrong characters appear
when viewing NexTView.
Solution
•Check the aerial connection.
• Plug the TV in and press the
button on the front of the TV.
•If the standby indicator is on, press TV button on
the remote control.
•Using the menu system, select the “Picture Adjustment” menu
and select “Reset” to return to the factory settings.
•Check that the optional equipment is on and press the
button repeatedly on the remote control until the
correct input symbol is displayed on the screen.
• Press the + button on the remote control.
• Check that “TV Speakers” is “On” in the “Sound Adjustment”
menu.
• Check that headphones are not connected.
• Using the menu system, select the “Picture Adjustment”
menu and select “Reset” to return to factory settings.
• This is not a malfunction. Press the number buttons on the
remote control to select the desired channel.
• Turn off any equipment connected to the Scart connector on
the rear of the TV.
• This is not a malfunction. It could be caused because some
broadcast TV uses the same or close frequency as the remote
control locator. This problem will disappear when you stop
pressing the button.
• Using the menu system, enter to the “Language/Country”
menu and select the country in which you operate the TV set.
For Cyrillic languages, we recommend to select Russia
country in the case that your own country does not appear in
the list.
• Using the menu system enter to “Language/Country” menu
(see page 14) and select the same language as the NexTView is
broadcasted.
continued...
03GBKV28FX66B.fm Page 25 Wednesday, January 15, 2003 5:15 PM