Socket Mobile 56K Modem Card - Manual (Page 39)

CHAPTER 3: SETUP FOR CASIO BE-300 | 39
STEP 6: Connect to a Telephone Line
With the card still in your mobile computer, connect to an analog telephone
line.
STEP 7: Dial and Connect!
1. After setting up your dial-up connection in Step 5, your new connection
should be listed in the Connections screen. Select your modem
connection, then tap Connect.
2. In the Dial-up Connect screen, verify the phone number. Tap Connect.
3. A series of screens will appear, reporting the status of your call. The
Power and Data Status LEDs will blink.
4. When your device has connected, it will report Connected. Two icons
will also appear at the bottom of your screen.
Connection status icon: indicates active remote networking
connection
Modem status icon:
GREEN — connected RED — data transmitting
When your device has connected, the Link and Power Status LEDs will
stay on, and the Data Status LED will flash during data transmission.