Sony LBT-XG500 - Manual (Page 10)

10
Playing CDs without
interruption
–– Non-Stop Play
You can play CDs without pausing between
tracks.
1
Press FUNCTION repeatedly until “CD”
appears, then load a CD.
2
Press NON STOP so that the indicator
on this button lights up.
3
Press HX .
To cancel Non-Stop Play
Press NON STOP so that the indicator on this
button goes off.
Programming the CD
tracks
–– Program Play
You can make a program of up to 32 tracks
from all the CDs in the order you want them to
be played.
1
Press FUNCTION repeatedly until “CD”
appears, then load a CD.
2
Press PLAY MODE repeatedly until
“PROGRAM” appears.
3
Press DISC SKIP to select a CD.
4
Turn the jog dial until the track you
want appears.
5
Press PLAY MODE once.
The track is programmed. First “STEP” and
the programmed playing order appear, then
the total playing time appears.
6
To program additional tracks, repeat
steps 3 to 5.
Skip step 3 to select tracks from the same
disc.
7
Press HX .
To
Cancel Program Play
Check the program
Clear a track from
the end
Clear a specific track
in stop mode
Add a track to the
program in stop mode
Clear the entire
program
Tips
• The program you made remains in the CD player
after it has been played back. Press HX to play
the same program again.
• If “--.--” appears instead of the total playing time
during programming, this means:
– you have programmed a track number
which exceeds 20.
– the total playing time has exceeded 100 minutes.
Press
PLAY MODE repeatedly
until “PROGRAM,” “ALL
DISCS SHUFFLE” or “1
DISC SHUFFLE”
disappears.
CHECK on the remote
repeatedly. After the last
track, “CHECK END”
appears.
CLEAR on the remote in
stop mode.
CHECK on the remote
repeatedly until the number
of the track to be erased
lights up, then press
CLEAR.
1 Press DISC SKIP to
select a CD.
2 Turn the jog dial to select
a track.
3 Press PLAY MODE.
x once in stop mode or
twice while playing.