Samsung HT-BD7200 - Manual (Page 78)

Using BLUETOOTH
78
Using BLUETOOTH
You can use a Bluetooth device to enjoy music with high quality stereo sound, all without wires!
what iS BluEtooth?
Bluetooth is a new technology that enables Bluetooth-compliant devices to easily interconnect with each
other using a short wireless connection.
A Bluetooth device may cause a noise or malfunction, depending on usage.
When a part of the body is in contact with the receiving/transmitting system of the Bluetooth device or the
Blu-ray Home Theater.
Electrical variation from obstructions caused by a wall, corner or office partitioning.
Electrical interference from same frequency-band devices including medical equipment, microwave oven and
wireless LAN.
Pair the Blu-ray Home Theater with the Bluetooth device while maintaining a close distance.
The further the distance is between Blu-ray Home Theater and Bluetooth device, the worse the quality is. If the
distance exceeds the Bluetooth operational range, the connection is lost.
The Blu-ray Home Theater supports Middle Quality SBC data(237kbps@48kHz) and High Quality SBC
data([email protected]).
In poor reception-sensitivity areas, the Bluetooth connection may not work properly.
The Blu-ray Home Theater has an effective reception range of up to 10 meters in all directions if there are no
obstacles. The connection will be automatically cut off if the distance is out of this range. Even within this range,
the sound quality may be deteriorated by obstacles such as walls or doors.
to connEct thE Blu-Ray homE thEatER to a BluEtooth DEvicE
check if the Bluetooth device supports the Bluetooth-compliant stereo headset function.
Press the Function button on the front panel of the Blu-ray Home Theater repeatedly until "Bt auDio" appears.
The mode switches as follows :
BD/DvD  D.in  auX  Bt auDio  Fm.
“REaDy” appears on the front display.
Select the Bluetooth menu on Bluetooth device you want to connect.
(refer to Bluetooth device's user manual)
Select the Stereo headset menu on the Bluetooth device.
You will see a list of scanned devices.
Select "Samsung BD theater" from the searched list.
When the Blu-ray Home Theater is connected to the Bluetooth
device, the Blu-ray Home Theater will display "connect" on the front
display, followed by the device name of the connected Bluetooth
device.
The Blu-ray Home Theater connection is complete.
Play music on the connected device.
You can listen to the music playing on the connected Bluetooth
device over the Blu-ray Home Theater.
You may be required to enter a PIN code(password) when connecting the Bluetooth device to the
Blu-ray Home Theater. If the PIN code input window appears, enter <0000>.
The Blu-ray Home Theater may control play related function only when connected device supports
the function.
The Blu-ray Home Theater supports Middle Quality SBC data(237kbps@48kHz) and High Quality
SBC data([email protected]).
•
•
•
•
•
•
•
•
•
1.
•
•
2.
3.
•
4.
•
•
5.
•
M



Connect
Bluetooth devide
HT-BD7200_XAA_0317-3.indd 78 2009-03-17 �� 8:07:34