Samsung SR-L65 EN - Manual (Page 13)

12
INSTALLING A REGULAR BOTTLE
Press the fixing lever, lift the exclusive water tank
upwards, then remove it.
Remove the water supply device from the exclusive
water tank, then set the inner groove of the water
supply device in a regular spring water bottle and fix it
in position by turning it.
Turn the water supply device over and then fix it in
position in the hole.
• Gurgling sounds may be heard when air enters the water tank from regular mineral water or
beverage bottles.
• Some regular mineral water or beverage bottles may not fit the water supply device, depending
on their size.
• If water does not come out satisfactorily when you press the “press” button, press it again.
• Do not use carbonated drinks, such as cola, cider or sodas. When you press the button, the
beverage may spurt out due to the pressure of carbonic gas accumulated in the upper part of
beverage bottle.
• Use bottled mineral water or boiled tap water that does not contain any particles.
Note
W2-PJT(EN) 12/8/01 11:24 AM Page 12