Siemens K44 - Manual (Page 10)

10 K44 Duo Installation & User manual
ENG Programming
Before you start programming K44 Duo, make a note
of the codes to be used, to what timing group they
should belong and which relay output they should
control. At the back of this manual you will find a
chart designed for this purpose. Look at the chart
as you program K44 according to the instructions
below.
Buzzer and LEDs
During programming you will be guided by the buzzer
and the LEDs.
In programming mode before a function is chosen:
Green and yellow LED flashes.
During programming: Yellow LED goes out. Green
LED is lit.
Correct instruction: Confirmed by a rising signal
consisting of two quick beeps.
Faulty instruction: Confirmed by a falling signal
consisting of two quick beeps.
NoTE! During programming mode, if a button is not
pressed within 20 seconds, the code lock
goes back to normal operation.