Sonic Blue MVP841 - Manual (Page 16)

16
If you wish to change the audio language, press 1 again to
access the audio language choice submenu.
Press 1 to select English.
Press 2 to select French.
Press 3 to select Spanish.
Press 4 to select the original language of the disc (fac-
tory default language).
Press 5 to select another language code.
Press the CLEAR Push-button if you have made an in-
correct choice and wish to change the selection.
When an audio language is selected, the Disc Languages
menu will reappear.
Subtitle
The second submenu choice is Subtitle. The Subtitle Dis-
play will indicate Automatic, which is the Factory Default
setting. Subtitles will appear in the language selected in the
previous Audio Language choice menu. Refer to figure 6.
Note: In the Automatic mode, Subtitles can be turned off for
any disc that is being played. If instead of Automatic, a
specific Subtitle Language is selected, the Subtitle will
appear every time, but can be turned off only while that
specific disc is played.
If you wish to change the Subtitle Language, press 2 to ac-
cess the subtitle submenu.
Press 1 to select Automatic.
Press 2 to select English Subtitles.
Press 3 to select French Subtitles.
Press 4 to select Spanish Subtitles.
Press 5 to select another language for Subtitles.
Figure 6
Figure 7
When a Subtitle option is selected, the Disc Languages
menu will reappear.
On Screen Menu Language
The third submenu choice is On Screen Menu Language.
English will be indicated which is the factory default set-
ting. Refer to figure 7
Note: This feature will function only if the required menu
language is encoded on the disc.
If you wish to change the On Screen Menu Language,
press 3 to access the Menu Language submenu.
Press 1 to select English.
Press 2 to select French.
Press 3 to select Spanish.
Press 4 to select another language.
When a Menu language is selected, the Disc Languages
menu will reappear.
Press push-button Number 0 to exit back to the initial
setup menu.
After all setup adjustments are complete, press push-button
Number 0 to exit the Initial Setup Menu.