Items supplied, Technical data, Appliance description – Silvercrest STV 45 A1 User Manual

Page 4: Before taking into use, Operation

Advertising
background image

- 2 -

Items supplied

Tower Fan
Plinth (2 pieces)
Nut (assembled on screw-thread)
Operating instructions

Check the items supplied for completeness directly
after unpacking. Remove all packaging material.

Technical data

Mains voltage:

220 - 240 V~, 50 Hz

Power consumption:

45 W

Protection class:

II /

Appliance description

1 Switch for oscillation
2 Screw-thread
3 Plinth
4 Recess for power cable
5 Connection nut
6 Switch 3 (high speed)
7 Switch 2 (medium speed)
8 Switch 1 (slow speed)
9 Switch "OFF"
0 Rotary switch (Timer function)

Before taking into use

1. Unscrew the connection nut 5 from the screw-

thread 2 on the ventilator tower.

2. Combine the two parts of the plinth 3 together

so that they form a circular plate and the pins
protrude into the recesses.

3. Insert the screw-thread 2 of the ventilator tower

through the hole in the plinth 3. Ensure that the
power cable lies in the recess 4 of the plinth 3.

4. Rescrew the connection nut 5 handtight onto

the screw-thread 2, such that the ventilator tower
and the plint 3 are securely connected.

5. Stand the ventilator upright.
6. Connect the plug with a wall power socket.

Operation

1. Position the rotary switch 0 at "ON".
2. Select the desired speed level by using the switches:
1 8= slow speed
2 7= medium speed
3 6= high speed
3. To switch the ventilator off for a short period,

press the button "OFF" 9. To completely switch
the ventilator off, press the button "OFF" 9 and
position the rotary switch 0 at "0".

Oscillation (Turn function)

Oscillation (Turn function)

• If you wish to activate the rotation function (oscil-

lation), place the switch "Oscillation"

1 at

the position ON.

• To switch the rotation function off, place the

switch "Oscillation"

1 at the position OFF.

Timer-Function

You can programme the ventilator to run for a specific
time (up to 120 minutes). It switches itself off on expiry
of the time period.

1. Place the rotary switch 0 at the required

operating time.

2. Select the required speed level.

On expiry of the selected time period, the ventilator
switches itself off.

IB_61747_STV45A1_LB6 10.11.2010 15:25 Uhr Seite 2

Advertising