Siemens CP 243-2 User Manual
Cp 243-2 as-interface master, Simatic net
Advertising
Technical Description and
Installation Instructions
Interface to the User Program
in the S7-200 CPU
Access to the Data of the AS-i
Slaves
Signaling Errors and Diagno-
stics in the User Program
Eliminating Problems /
Error Displays
Appendix
AS-Interface Protocol Imple-
mentation Conformance State-
ments
07/2000
C79000-G8976-C142
Release 02
CP 243-2
AS-Interface Master
Manual
SIMATIC NET
Industrial Ethernet
PROFIBUS
AS-Interface
AS-Interface
Advertising
Table of contents
Document Outline
- CP 243-2 4 AS-Interface Master
- Preface
- Contents
- 1 Technical Description and Installation Instructions
- 1.1 General Notes on Operation ã Safety Warnings
- 1.2 Uses of the Module
- 1.3 Technical Specifications of the Module
- 1.4 Installing the Module
- 1.5 Front Panel … Access to all Functions
- 1.6 Terminal Block
- 1.7 Modes of the CP 243-2
- 1.8 Displays and Operator Controls
- 1.9 Configuring the AS-Interface with the SET Button
- 2 Interface to the User Program in the S7-200 CPU
- 3 Access to the Data of the AS-i Slaves
- 4 Signaling Errors and Diagnostics in the User Program
- 5 Command Interface
- 5.1 Command interface of the CP 243-2
- 5.2 Description of the AS-i Commands
- 5.2.1 Set_Permanent_Parameter
- 5.2.2 Get_Permanent_Parameter
- 5.2.3 Write_Parameter
- 5.2.4 Read_Parameter
- 5.2.5 Store_Actual_Parameters
- 5.2.6 Set_Extended_Permanent_Configuration
- 5.2.7 Get_Extended_Permanent_Configuration
- 5.2.8 Store_Actual_Configuration
- 5.2.9 Get_Extended_Actual_Configuration
- 5.2.10 Set_LPS
- 5.2.11 Set_Offline_Mode
- 5.2.12 Select_Autoprogramming
- 5.2.13 Set_Operation_Mode
- 5.2.14 Change_AS-i_Slave_Address
- 5.2.15 Get_AS-i_Slave_Status
- 5.2.16 Get_LPS, Get_LAS, Get_LDS, Get_Flags
- 5.2.17 Get_Extended_Total_Configuration
- 5.2.18 Store_Extended_Total_Configuration
- 5.2.19 Write_Extended_Parameter_List
- 5.2.20 Read_Extended_Parameter_Echo_List
- 5.2.21 Read_Version_ID
- 5.2.22 Read_AS-i_Slave_ID
- 5.2.23 Read_AS-i_Slave_ID1
- 5.2.24 Write_AS-i_Slave_Extended_ID1
- 5.2.25 Read_AS-i_Slave_ID2
- 5.2.26 Read_AS-i_Slave_I/O
- 5.2.27 Get_LPF
- 5.2.28 Write_AS-i_Slave_Parameter_String
- 5.2.29 Read_AS-i_Slave_Parameter_String
- 5.2.30 Read_AS-i_Slave_ID_String
- 5.2.31 Read_AS-i_Slave_Diagnostic_String
- 5.2.32 Read_Data_and_Delta_List
- 6 Dealing with Problems / Error Displays
- A AS-Interface Protocol Implementation Conformance Statement (PICS)
- B References
- C Notes on the CE Mark
- D SIMATIC NET - Support and Training
- Glossary
- Index