Sharp AR-162S - Manual (Page 25)

23
MAKING COPIES
B/W REVERSE
The B/W REVERSE feature is used to reverse black and white areas.
● When the B/W REVERSE feature is selected, the exposure mode will be
automatically set to the MANUAL mode. Other exposure modes cannot
be selected.
Even if this feature is canceled, the MANUAL mode will not automatically
be canceled.
1 Place the original on the original table and close the
platen cover.
2 Press the B/W REVERSE key.
3 Check the copy paper size.
● If desired, the bypass tray can be selected by pressing the TRAY
SELECT key.
4 Make all other desired copier selections and press the
START key.
B/W reverse
Original Copy