Simmons Optics Simmons LRF 600 - Manual (Page 6)

UNit OF MEASURE OPtiONS
the LRF 600 can be used to measure distances in yards or meters. the unit of measure indicators are located in the lower right portion of the
LCD. to select between yards and meters, the unit should be off. While looking through the eyepiece, press and hold the POWER button down for
approximately 5 seconds. During this time all liquid crystal segments and icons will be displayed. As you continue to depress the power button, the
display will toggle back and forth between Yards and Meters. Once the unit of measure desired is displayed, simply release the power button. the
device will return to the last unit of measure setting used each time the unit is turned on.
SPECiFiCAtiONS
OPtiCAL DESiGN – the SiMMONS LASER RANGEFiNDER features a fixed focus monocular optical system for viewing your target. A liquid crystal
display (LCD) is mounted within the optical system and when activated, displays a reticle for targeting, yards, and low battery indicators. inherent
in the manufacturing process are small black spots that appear in the optical system. these are a natural characteristic of the LCD and cannot be
fully eliminated in the manufacturing process. they do not affect the distancing performance of the unit.
SPECIFICATIONS (cont’d)
• Dimensions: Pocket Size, measuring 4.2 x 3.6 x 1.9 inches
• Weight: 7.7 oz.
• Accuracy: +/- 1 yard
• Magnification: 4x
• Display: LCD (even and odd numbers)
• Power Source: 9 volt alkaline battery
• FOV: 320 ft. @ 1000 yards
• Total Eye Relief: 20mm
• Exit Pupil: 4 mm
• Single Button Operation
4