Speco Technologies D8RS - Manual (Page 67)

67
7-7-1. System
Select System to set system and time settings.
1. Date Display Format: YYYY/MM/DD, MM/DD/YYYY, DD/MM/YYYY, YYYY-MM-DD, MM-DD-YYYY,
DD-MM-YYYY
2. Client Access: Enable/Disable remote access through network client software.
3. NTP: Sets whether to synchronize the time using NTP server or not.
- Primary SNTP Server: Input the NTP primary server address.
- Secondary SNTP Server: Input the NTP secondary server address.
- Time Zone: Select the time zone.
- Connection Mode: Select the connection mode to NTP time server.
Connection Period: Set the connection period.
4. Send E-Mail: Sets whether to enable/disable e-mail sending function.
- TRANSMISSION MODE: Sending an image only of the channel when an alarm event is triggered.
- IP NOTIFICATION: Enable/disable sending e-mail when the IP address of your DVR is changed.
- SMART: Enable/disable sending e-mail reports when S.M.A.R.T. is triggered
- EVENT ALARM: Enable/disable sending e-mail reports when an alarm event is triggered.
- MAIL PORT: Mail port setting.
- SEURE OPTION: Select a secure mail server connection. (SSL or TLS)
- Mail to: Input the appropriate email address to enable sending e-mail reports
- Mail Server: Input the SMTP server name as well as the user ID and password.
- Mail From (Return Mail Address): Set the source e-mail address to be notified to the destination.
5. USER NAME: Name the DVR
.