Getting ready to start recording – Samsung HMX-H204LP User Manual

Page 38

Advertising
background image

t *GZPVDBOOPUVTFBNFNPSZDBSEUIBUIBT

been used with another device, format it
with your camcorder. Note that formatting
erases all information on the memory card.

t "NFNPSZDBSEIBTBDFSUBJOMJGFTQBO*G

you cannot record new data, you have to
purchase a new memory card.

t %POPUCFOE ESPQ PSDBVTFTUSPOHJNQBDU

to the card.

t %POPUQMBDFGPSFJHOTVCTUBODFTPOUIF

memory card terminals. Use a soft dry
cloth to clean the terminals if required.

t %POPUQBTUFBOZUIJOHPUIFSUIBOMBCFM

provided with the card on the label pasting
section.

t #FDBSFGVMUPLFFQUIFNFNPSZDBSEPVUPG

the reach of children, who might swallow
it.

Notes on use

t 4BNTVOHJTOPUSFTQPOTJCMFGPSEBUBMPTT

due to misuse.

t 8FSFDPNNFOEVTJOHBNFNPSZDBSE

case to avoid losing data from moving and
static electricity.

t "GUFSBQFSJPEPGVTF UIFNFNPSZDBSE

may get warm. This is normal and is not a
malfunction.

The camcorder supports SD and
SDHC memory cards for data storage
preference!
The data storage speed may differ,
according to the manufacturer and
production system.
t 4-$ TJOHMFMFWFMDFMM TZTUFNGBTUFS

write speed enabled.

t .-$ NVMUJMFWFMDFMM TZTUFNPOMZ

lower write speed is supported.

For best results, we recommend using a
memory card that supports faster write
speed.
Using a lower write speed memory card
for recording video may cause diffi culties
when storing.
You may even lose your video data during
the recording.
In an attempt to preserve any bit of the
recorded video, the camcorder forcibly
stores the video on the memory card and
displays a warning:
i-PXTQFFEDBSE1MFBTFSFDPSEBUB
MPXFSSFTPMVUJPOw
If you are unavoidably using a low speed
memory card, resolution and quality of
the recording may be lower than the set
value. page 54
The higher the resolution and quality, the
more memory will be used.

getting ready to start recording

30

Advertising