Smart Technologies X800 - Manual (Page 36)

2 8 | C H A P T E R 4 – U S I N G A N D M A I N T A I N I N G Y O U R S M A R T B O A R D I N T E R A C T I V E
W H I T E B O A R D
• Keep your other hand, elbows and loose clothing away from the interactive
surface. They can generate unintentional commands.
• For “click” commands, quickly tap your finger on the interactive surface. Also,
make sure you lift your finger far enough away from the interactive surface
between presses so that your finger is out of the interactive whiteboard cameras’
view.
• For “erase” commands, use your flattened hand, palm or the bottom of your fist.
• When using the pen tray’s eraser, use the wide surface for large areas, and the
smaller, angled surface for smaller areas. Don’t use the edge of the eraser
because this could be interpreted incorrectly.