Appendix e: wds explained – SMC Networks Gateway TTTM5800X User Manual

Page 55

Advertising
background image

All Rights Reserved. Copyright 2006 Teletronics International, Inc.
2 Choke Cherry Road, Rockville, MD 20850 Tel: 301.309.8500 Fax: 301.309.8851

http://www.teletronics.com

Can't find information about a product you want to buy on the web? Do you want to know more about networking with
Teletronics products?

Give us a call at: 301-309-8500 Or fax your request in to: 301-309-8551

Don't wish to call? You can e-mail us at: [email protected]
If any Teletronics product proves defective during its warranty period, you can email the Teletronics Return
Merchandise Authorization department to obtain a Return Authorization Number at: [email protected]

(Details on Warranty and RMA issues can be found in Appendix A and B)

Appendix E: WDS Explained

One of the requirement for a WDS network is that the operational frequency channel on all the APs must be the same.
This is one of the reasons why there is a huge bandwidth penalty when setting up a wireless network in WDS mode.

How to properly configure your APs in a WDS network will foremost depend on the locations of your wireless hotspots.

Advertising
This manual is related to the following products: