Spin Master Air Hogs Aero Ace User Manual

Spin Master For motorcycles

Advertising
background image

Charger/Controller

Antenna

ON/OFF Switch

Throttle

Charge Door

(to access

Charge Nozzle)

Charging

LED

Power

LED

Left/Right

Toggle

Decal Sticker

Sheet

Steering

Trim Knob

TM

INSTRUCTIONS

TM

Check to make sure contents
are complete:
• 1 Air Hogs

TM

RC Aero Ace

TM

• 1 Charger/Controller
• 1 Decal Sticker Sheet
• 3 Aluminum Stickers

Experience radio-controlled flight with the Air Hogs

TM

RC Aero

Ace

TM

! The Aero Ace

TM

makes flying fun & easy! Just choose

the direction you want to fly and press the controller toggle. The
ultra-light Aero Ace

TM

is powered by a lithium battery for long

flights, features precision speed control and damage-resistant
high density foam. The Aero Ace

TM

also includes an integrated

Charger/Controller unit for convenient portability and easy
handling on the field. Perfect for both indoor and outdoor flights.

Lower Wing

Fuselage

Aero Ace™ Plane

Upper Wing

Propellers

Vertical Tail Wing

Horizontal

Elevator

Antenna

1. Use a Phillips screwdriver to loosen

the battery door.

2. Slide the battery door to the back and remove.
3. Install 6 AA 1.5-V alkaline batteries

(not included).
Be careful to align the positive (+) and negative
(-) polarities with the corresponding markings
inside the battery compartment.

4. Reinstall the battery door and tighten the screw.

3

1

Charger/Controller

Battery

Door

Six AA

1.5-V

Alkaline

Batteries

IMPORTANT TIP: TURN YOUR CONTROLLER
ON TO ENSURE THAT THE BATTERIES ARE
INSTALLED PROPERLY. THE RED LIGHT ON
THE FRONT OF THE CONTROLLER SHOULD
TURN RED.

Your

Aero Ace™

Plane has

preinstalled

rechargeable

batteries

in the plane’s

fuselage

.

Because the

Controller’s

AA batteries

are used

for 2 functions –

charging and

controlling, it is

recommended

they be

replaced after

every 20 – 25

flights.

Antenna

After each flight, store the plane in the package
to prevent damage.

REPAIRS

APPLYING DECALS

IMPORTANT: PLACE THE LABELS ON
A FLAT SURFACE TO AVOID CREASES
AND BUMPS THAT WILL ADVERSELY
AFFECT THE PLANE’S FLIGHT.

Peel each Mylar label
from the adhesive
backing and apply the
sticker as shown.

Decal Sheet

Apply
Decal

Apply
Decal

Apply

Decals

2

CHARGER/CONTROLLER BATTERY INSTALLATION

If the wings on
your plane get
damaged they

can be easily

repaired with

clear

tape as

shown.

Advertising