Sony S-Frame DPF-V1000N - Manual (Page 67)

C:\#WORK\@DPF\DPF-V1000N\Writer-OP\06_FinalDelivery\4155758111\4155758111DPFX1000NCEK\01GB-
DPFX1000NCEK\080C06.fm
Master: Right
DPF-X1000N, DPF-V1000N 4-155-758-11 (1)
67 GB
Error m
e
s
s
a
g
e
s
Error reading the Memory Stick. /
Error reading the CompactFlash
card. / Error reading the SD
Memory Card. / Error reading the
xD-Picture Card. / Error reading
the internal memory./ Error reading
the External Device. • An error has occurred. If this error message is displayed
frequently, check the status of the memory card or external
device with a device other than the photo frame.
• In the case of an external device:
The external device may be write-protected. Cancel the
write-protection setting for the device you are using. The
internal memory of a digital camera may be write-
protected.
• For an internal memory:
Initialize the internal memory.
Note
When you initialize the internal memory, please note that all the
image files added to the album are deleted.
Write error in the Memory Stick. /
Write error in the CompactFlash
card. / Write error in the SD
Memory Card. / Write error in the
xD-Picture Card. / Write error in
the internal memory./ Write error in
the External Device.
The Memory Stick is read only. • A “Memory Stick-ROM” is inserted. To save the images,
use the “Memory Stick” recommended.
The Memory Stick is protected. • A protected “Memory Stick” is inserted. To edit and save
the images, use an external device to remove protection.
Media format not supported. • For a memory card, use your digital camera or other device
to format the memory card.
• For the internal memory, initialize it with the photo frame.
Note
When you initialize the media, all the files on the media will be
deleted.
Cannot open the image. • The photo frame cannot display or open an image file
whose format is not supported.
No more USB hubs can be
connected. • Connect the device directly to the photo frame, or use a
device without a built-in USB hub.
Incompatible USB device. Check
device’s USB settings. • Connect a device with support for mass storage. If the USB
setting of your device is incorrect, set the mass storage
mode in the USB setting.
Error message Meaning/Solutions