Sony S-Frame DPF-V1000N - Manual (Page 17)

C:\#WORK\@DPF\DPF-V1000N\Writer-OP\06_FinalDelivery\4155758111\4155758111DPFX1000NCEK\01GB-
DPFX1000NCEK\040C02.fm
Master: Right
DPF-X1000N, DPF-V1000N 4-155-758-11 (1)
17 GB
B
a
si
c o
p
e
rat
io
ns
• When you want to re-insert the memory card,
remove the photo frame from the wall, then eject
and re-insert the memory card while the photo
frame is placed on a stable surface.
• Store the stand in the place provided when you hang
the photo frame on the wall.
• Connect the AC power cord to the photo frame and
set the power switch to ON. And then connect the
AC power cord to the AC adaptor and to the wall
outlet after hanging the photo frame on the wall.
• We take no responsibility for any accidents or
damage caused by defects of attachment, misuse, or
natural disasters, etc.
Connecting to the AC
power source
1
Insert the plug of the AC adaptor
into the DC IN 8.4 V jack on the rear
of the photo frame.
2
Connect the AC power cord to the
AC adaptor and the wall outlet.
Notes
• The socket outlet should be as close as possible to
the unit, and easily accessible.
• Do not place the photo frame in an unsteady
location such as on an unsteady table or tilted
surface.
• Connect the AC adaptor to an easily accessible wall
outlet close by. If trouble occurs while using the
adaptor, immediately shut off the power by
disconnecting the plug from the wall outlet.
• Do not short the plug of the AC adaptor with a
metal object. Doing so may cause a malfunction.
• Do not use the AC Adaptor placed in a narrow
space, such as between a wall and furniture.
AC adaptor
To wall outlet
Plug
Continued